I have a made a “working” Stargate model from the SG1 TV-show. It spins, the chevrons move and lights up and when a correct address is dialled, the wormhole is established. The wormhole is an infinity mirror effect. The stargate is controlled with a DHD. You can check out the video presentation of the Stargate in action here:
Here is a video showing one Stargate dialing another Stargate
I like 3d printing, electronics, programming and making stuff. I also enjoy the Stargate TV-series and decided to make a “working” model of the stargate as seen in the TV-show.
This was a challenging and fun project and I had to learn a lot of new stuff. This has been a very time-consuming project. There are a few variations of Stargates used in the show and I chose to make the original one from the SG1 series. There are also several logical “glitches” in the technical workings of the gate as seen in the TV show and it even behaves differently in different episodes. I have made it work as best I can while staying as true as possible to the feeling and essence of the TV-Show.
Features
- A fully interactive working Stargate complete with a DHD (Dial Home Device).
- The Stargate ring spins and places the dialled symbol on the correct chevron as the traveller is inputting the address by using the DHD.
- All 7 chevrons move and lights up when engaged.
- The Stargate can dial any milky-way address used in the show.
- NEW: The stargate can now dial other stargates over the Internet, and receive incoming wormholes from other stargates on the Internet.
- When a correct address is input using the DHD, the wormhole is established.
- The wormhole effect consists of a animated infinity mirror of 122 LED’s.
- Complete with sound effects from the TV Show.
- When the wormhole stays open, selected random audio clips from the TV-Show is played.
- As in the TV-Show the wormhole can stay open for 38 minutes. When the time limit is reached, a random quote from the show where the time limit is mentioned is played and the wormhole disengages.
- Do not dial the black hole.
- The Stargate itself is about 39 cm in diameter.
Want to know how it’s all put together? Find out more about the Stargate here, and the DHD here.
Questions or comments?
Have you got any questions or comments related to this project? Feel free to use the form below. The form is moderated, and your comment will not appear to the world until it is approved. Would you rather want to contact me directly? You can reach me at kristian@thestargateproject.com
Dude. This is the one time I’ve wanted to use the ‘Take My Money’ meme image. Best DIY project I’ve ever seen. Would buy in a heartbeat but will definitely see if I can get my hands on the printer files if you decide to make them available.
Looks like you’ve made it to Hacker News!
Hi Scott!
Thanks for your kind words. The 3D files, software etc are already available for purchase. You can check them out here:
https://thestargateproject.com/product/kristians-stargate-files/
It’s been truly amazing to see how this projects is spreading around the Internet.
This alone without any motors or electronics is so cool. But then, … you went and made it actually move and plays sounds. LOVE IT!!!! The infinity mirror and the DHD!!! WOW!!!! Very cool. You are awesome!!!!!
I’ll wait for the version that can dial Atlantis in the Pegasus Galaxy. This is truly awesome!
This is beyond awesome! I love it and more so since I’m also a fan of the show. No doubt if you could make or somehow collobroate with a small company on mass producing these mini stargates. P.S. watch out for those wraiths.
Freaking Awesome!
If you sell one of these I would gladly purchase it, This is awesome!
This is the coolest thing EVER! Congrats!
Excellent s est du génie je vous en achète une des que vous êtes prêt a vendre recontacter moi merci
Tony
moi aussi
I really love this.
Dude this thing is damn amazing! I was about to start printing a stargate model I saw on Thingiverse but this thing is epic. Its pretty much one of the best 3D print projects I have seen. Are you planning on making any how to guides and the like in how to build it and do the electronics?
I can’t wait to see the 100% finished product! Its so exciting! I love it so far! We would be interested in the files, as well! Keep us updated!
Hi Kristian,
This is simply the most awesome DIY project that i found on the internet in 2020
Please please please share the files and BOM, either publicly or at least privately (i will gladly pay for those)
I kind of need this in my life now 🙁
Also it looks like a perfect project for long winter evening that are coming my way (central Europe)
Thank you in advance
p.
Hi everyone!
Thanks for commenting. I am glad you like this Stargate project of mine. I just wanted to let you know that the project is still developing and a new update is coming soon. Most of you ask for access to the files etc. My intentions at the moment is to complete the gate first. (will soon be done). And then I’ll try to make a list as complete as I can of all the parts and gadgets used to make the gate. I’ll try to include links to online shops for most of the parts. I will also archive all the files, 3D files etc. and make them available online for you. I am thinking of taking a small fee for the files. Please check back from time to time, as the update and files will be available shortly.
Hello Kristian,
What a great piece you have there. I would love to be able to print this myself and see if I can figure out all the electronics as well. Will you share your files and instructions? Either paid or for free? I would love to tackle this project myself.
Great job so far, it looks amazing.
Best regards.
Really, if you can make enough (or a hundred’ll do) you could make serious money even if you had to pay royalties (for official branding and limited edition). I’d pay anything for this.
Just take my money, I would love to have one of these sitting on my desk at work
WOW! Awesome project! Really amazing!
I came across this one: https://www.youtube.com/watch?v=44F3BeYHxLQ
but your Start Gate is more complete, like the added blue glow, when the dial in is completed and the portal is active. A difficult one to make.
Why not, spinning all the time is so much cooler 🙂 I think I’d like to try and give it a go at building your spinning gate version at some point when you’re finished, but perhaps try to do an SGC/gate room/gantry-type base!
Wow, this is crazy amazing. I’ve been looking at several projects in making a working Stargate and this is by far the best one I’ve seen. I’d love to have the skillset to design and build something like this. As with one of the other comments above, I’d certainly be interested if you ever decide to sell one of these once you’ve finished the design! Otherwise, it would be great to buy a design pack/build yourself kit 🙂 Anyway, keep up the good work Kristian! All the best.
Hi Jon,
Thanks for taking the time to comment on my project. Feel free to check back when the gate is done. I will most likely make the files available for download in the end.
That’s no problem, thanks for taking the time to put your project progress online. It’s great to see stuff like this. Out of interest, can I ask what printer you’re using? The resolution looks so fine!
Hi Jon.
I print all the parts on my Wanhao Duplicator 6. It’s got a rather small print surface compared to the size of the Stargate model. That’s one of the reasons why I split it up in so many parts. It’s taken me a lot of time, trial and error to find print settings that works. I use the simplify3d software to generate the gcode files for the printer.
Many thanks for the printer info, Kristian. Looks like you’ve got it dialled in really well. First part of the paint job is looking good, your brother’s doing a fine job! Do you have any plans to try to apply some fake moss/greenery around/on the base? Really looking forward to how the gate itself will look after painting.
Do you think you might look to add a second mode in future where the ring doesn’t spin and the DHD simply activates the chevrons? I know the gate often behaves differently depending on the episode/plot, but I was generally under the impression that the Earth/SGC gate ring only spun because they don’t use a DHD (and use the dialling computer instead)?
Anyway, very much looking forward to your next update 🙂
Hi Jon,
I have been thinking about adding som “nature” around the base. It’s not prioritized at the moment. But if i can find the inspiration, maybe it’ll get done. I do not think i will add a “not spinning mode”. I have the spinning functionality, so why not use it. 🙂 Also i believe when the chevron lights up without spinning in the series, it’s mostly an incoming wormhole and not when they dial out. But often it’s very unclear in the different episodes.
This is awesome, I love what your doing.
Hi Martin.
Thanks for commenting. I’m glad you like it. The project is slow going at the moment. But there is an update on the way.
Étant fan de stargate, pourras tu donner des nouvelles quand tu l’auras fini?
Très beau joujou.
Can I purchase one from you?
Let me know, really cool!
Ed
I am glad to hear that you liked it! I will check to see about the possibility for selling a Stargate or two when the project is finished. It is currently in its final stages, and it will take some time until the painting is done.
Woooaaah !
I want this ! it really interests me how much you would sell it
hello, frankly I’m on the ass … I think your final projects will be great, let me know when it’s finished … I will surely be interested to acquire a thank you 🙂
mathias63310@hotmail.fr
Bonjour,
Je suis fan de votre travail. Je n’ai ni les connaissances ni les capacités techniques pour cela mais si un jour vous diffuser vos plans, je serai plus que ravi de me lancer dans ce projet avec quelque amis.
Merci de continuer à me faire rêver un peu plus sur cette série.
De la part d’un fan de France félicitations et bon courage.
Great project. Highest detailed models I’ve seen. Did you post the 3D files to Thingiverse or other similar site or willing to sell?
Hi Kevin,
Thanks for commenting on my project. I have not posted any 3D files anywhere at the moment. The project is not yet complete. When I am finished I will decide if I’m going to make any files available. I guess there will be the most interest in the STL files? Currently the project is in it’s final stages. Painting.